10.5 Handling
Transport
l
Climate category 2K3 according to EN61800-2, IEC 60721-3-2
l
Temperature-25...+70°C, max. 20K/hr change
l
Humidityrel. humidity 5% - 95% , no condensation
l
Only by qualified personnel in the manufacturer’s original recyclable packaging
l
Avoid shocks, especially to the shaft end
l
If the packaging is damaged, check the motor for visible damage. Inform the carrier and, if
appropriate, the manufacturer.
The motor should not be picked up by the cable! The cable bushing could
come loose or allow for contamination to get inside the motor, if the cable
must support the weight of the motor. This could lead to electrocution haz-
ard due to failure of electrical terminations.
Packaging
l
Cardboard packing with Instapak
®
foam cushion.
l
You can return the plastic portion to the supplier (see "Disposal").
Motor
type
Packing
Max. stacking
height
Motor
type
Packing
Max. stacking
height
AKMH2
Cardboard
7
AKMH5
Cardboard/
wooden crate
6
AKMH3
Cardboard
6
AKMH6
Wooden crate
6
AKMH4
Cardboard
6
If packages are being stacked, they must be in the horizontal orientation.
Storage
l
Climate category 1K4 according to EN61800-2, IEC 60721-3-2
l
Storage temperature- 25...+55°C, max. variation 20K/hr.
l
Humidityrel. humidity 5% - 95%, no condensation
l
Store only in the manufacturer’s original recyclable packaging
l
Max. stacking heightsee table in chapter "Packaging"
l
Storage timeunlimited
AKMH Installation | Table of Contents
Kollmorgen | March 2014
35
Summary of Contents for AKMH2
