12.3.1 Tested properties with respect to cleaning agents
The testing lab of ECOLAB Deutschland GmbH tested the resistance of the Washdown and
Washdown Food surfaces to the following industrial cleaning agents:
l
P3-topactive DES
l
P3-topax 12
l
P3-topax 56
l
P3-topax 66
l
P3-topax 990
In the process, the surfaces were immersed in the respective cleaning agent at 21°C tem-
perature for 28 days. This corresponds to approx. 2,500 cleaning cycles with 15-minute con-
tact each with the cleaning agent or 1,500 cleaning cycles with cleaning and subsequent
disinfection.
Kollmorgen can only give a guarantee for the motor's lifecycle if the tested cleansing agents
are used. Any cleansing agent other than those mentioned above can be tested by Koll-
morgen upon request and, if appropriate, be approved.
12.3.2 Cleaning plan
Recommended cleaning plan (short form) with tested cleaning agents:
Flushing with water (40 °... 50 °C)
Flushing with low pressure. From top to bottom in the direction of the drain. Clean the drain.
Foam cleaning
Foaming from top to bottom.
Alkaline:
P3-topax 66 (2-5%, 15 min daily)
Acid:
P3-topax 56 (2%, if necessary 15 min)
Temperature:
cold, up to 40 °C
Disinfection
Spraying with wayer (40 °... 50 °C) with low pressure. From top to bottom.
Spray disinfection:
P3-topax 990 (1-2%, if necessary 30-60 min)
Foam disinfection:
P3-topactiv DES (1-3%, if necessary 10-30 min)
AKMH Installation | Table of Contents
Kollmorgen | March 2014
45
Summary of Contents for AKMH2
