Instr 26-3200; 26-3210
Rev 01 2020-11
Page 14 of 17
2013–2021 SPORTSMAN 850/1000 MODELS
1. Connect all red positive wires to the positive
battery terminal. Connect all black negative wires
to the negative battery terminal. Torque to
specification.
TORQUE
Battery Bolt:
60 in-lbs (6 N·m)
2. Install front storage bin and attach two fasteners.
3. Install front bumper cover with four fasteners.
Tighten until fully seated.
4. Close front rack and attach two rubber latches.
5. Install accessory front brush guard, if equipped.
See Kit Instructions for procedure.
6. With vehicle key in ON position, test winch for
proper operation.
OPERATION
CONTROL SWITCH OPERATION
When properly installed, the control switches allow
you to operate the winch while seated in the vehicle
using the dash switch or remotely using the corded
switch. Proper switch operation is shown.
