Instr 26-3200; 26-3210
Rev 01 2020-11
Page 2 of 17
INTRO
Thank you for purchasing Kolpin engineered products. With proper installation, usage, care, and maintenance,
your Kolpin product will last for years to come.
BEFORE YOU BEGIN
• Read and understand the entire installation manual, including all installation instructions, operating
instructions, and safety warnings and guidelines before installing or operating your accessory. Failure to
comply may result in damage to the product, damage to the vehicle, and can lead to hazards up to and
including death.
• Verify all parts and tools are accounted for. If parts are missing, do not return to the store. Call us for help,
Toll
Free 1-877-956- 5746
• To ensure a satisfactory installation, follow all steps correctly and in the sequence described.
• Keep these instructions for future reference or for informational requests.
• To facilitate installation, make sure that your vehicle is clean and free of debris.
• All directions referring to right and left are when the rider is sitting on the machine.
ASSEMBLY TIME
Approximately 30 minutes
SAFETY INFORMATION
Please read and understand all assembly instructions, notices, and warnings before assembling and operating
your Kolpin winch.
Follow these guidelines to ensure satisfactory operation:
• Read this manual and your ATV/ UTV operators manual before use.
• Periodically check for wear and tightness of all fasteners. Replace or re-torque fasteners as necessary.
TOOLS REQUIRED
• Safety Glasses
• Cutting Tool
• Pliers, Push Pin Rivet
• Socket Set, Metric
• Socket Set, Torx
®
Bit
• Torque Wrench
• Wrench Set, Metric
