Instr 26-3200; 26-3210
Rev 01 2020-11
Page 6 of 17
3. Remove and discard two push pin rivets from
panel on front bumper cover. Remove and discard
panel.
2014–2020 SPORTSMAN 450/570 MODELS
1. Remove and keep rubber seal
C
.
2. Remove and keep four screws
D
from front cover
E
.
3. Lift front cover upwards slowly to disengage tabs
on cover from slots
F
.
4. Remove and keep nut from black (negative)
battery cable and disconnect negative battery
cable. Move boot off red (positive) battery cable.
Remove and keep nut from red (positive) battery
cable and disconnect positive battery cable.
WARNING
Always disconnect black negative (-) cable from
battery FIRST. Failure to do so will result in high
current electrical arc and may result in battery
explosion if tool touches grounded frame. Death or
serious personal injury may occur.
