Kolver DOCK04 Operator'S Handbook Manual Download

Page: 6 / 9

Vers. 300118

ENG

The DOCK04 double output connector makes it possible to connect two PLUTO

screwdrivers to one EDU2AE/TOP unit.

Connect the “

EDU2AE/TOP

” connector to the control unit using the cable supplied

with the DOCK04, then connect the screwdrivers to “

SCREWDRIVER1

” and

“

SCREWDRIVER2

” connectors.

The 24V signal on CN4 connector will activate when the desired program is selected

on the EDU2AE/TOP control unit.

This way only the wired PR will activate the relay (through the 24V output) which

will make screwdriver 1 switch to 2.

If no cables are wired, only “

SCREWDRIVER1

” connector will work.

The wiring order on “

INPUT

” is not relevant.

There’s no need to connect the ground cable COM 0V, as it already is on the inside

of the double output connector.

The EDU2AE/TOP control unit will be able to work manually using a switchbox or

socket tray, or in sequence mode.

View connector CN4 - EDU 2AE/TOP unit

Wired DOCK04 double output connector

In this example only programs

PR4

PR5

and

PR6

are wired and will activate the

screwdriver switch.

Summary of Contents for DOCK04










Search results

Summary of Contents for DOCK04

Reviews:

Related manuals for DOCK04

Brands by name

Popular brands

Kolver DOCK04, Operator'S Handbook Manual

Search results

Summary of Contents for DOCK04

Reviews:

Related manuals for DOCK04

Brands by name

Popular brands