99
INSTRUMENTS AND CONTROLS
SWITCHING OVER FROM ONE STEERING MODE TO THE OTHER
•
SWITCHING OVER FROM TWO-WHEEL STEERING TO
ALL-WHEEL STEERING
•
SWITCHING OVER FROM TWO-WHEEL STEERING TO
CRAB STEERING
Press buttons (1) and (2) at the same time and turn the steering
wheel clockwise or anticlockwise to align the front wheels.
The misalignment of the front wheels is signalled by the acoustic
alarm, which will stop once the wheels are correctly aligned.
The green led (A) will go out and the red led (B) will come on at
the same time. During the alignment phase the symbol (
)
will appear on the display (17) positioned on the front dashboard
and will go out as soon as the front wheels are aligned. At this
point the speedometer “Km/h or MP/h” will appear on the display
(17).
IMPORTANT
☞
•
Changing over from 2-wheel steering to all-wheel steering
is possible only with 1
st
, 2
nd
and 3
rd
gear engaged, with
the machine either in operation or at rest, provided that
the speed does not exceed 13 km/h (8MP/h).
CHECK
SERVICE
RWA34790
2
A
1
FRONT AXLE
B
17
CHECK
SERVICE
RWA28500
17
CHECK
SERVICE
17
000KM/h
000MP/h
Press buttons 1 and 3 at the same time and turn the steering
wheel clockwise or anticlockwise to align the front wheels.
The misalignment of the front wheels is signalled by the acoustic
alarm, which will stop once the wheels are correctly aligned. The
green led (A) will go out and the red led (C) will come on at the
same time. During the alignment phase the symbol (
) will
appear on the display (17) positioned on the front dashboard
and will go out as soon as the front wheels are aligned.
At this point the speedometer “Km/h or MP/h” will appear on the
display (17).
IMPORTANT
☞
•
It is possible to switch over from two-wheel steering to
crab steering only in 1
st
-2
nd
gear and with the machine at
rest.
CHECK
SERVICE
RWA34800
3
C
1
FRONT AXLE
17
A
CHECK
SERVICE
RWA28500
17
CHECK
SERVICE
17
000KM/h
000MP/h
Summary of Contents for 97SF11205
