286
ARRANGEMENT FOR THE INSTALLATION OF THE MANUAL HYDRAULIC HAMMER
6.10 ARRANGEMENT FOR THE INSTALLATION OF THE MANUAL
HYDRAULIC HAMMER
6.10.1 DESCRIPTION AND CONTROL
DANGER
•
The manual hydraulic hammer is very noisy; always wear headphones when using it..
•
The manual hydraulic hammer transmits intense vibrations that may cause psychical and physical
stress to the operator; be extremely careful especially at the end of work and have short rests when
you lose sensibility in the upper limbs.
The machine can be provided with delivery (1) and drain (2) cou-
plings for the use of a manual hydraulic hammer; the connection
to the machine is made up by two flexible pipes (3).
The hammer circuit is separated from the normal circuits of the
machine by means of a solenoid valve controlled by a push but-
ton positioned on the side dashboard.
The operation of the push button (4), which includes a connec-
tion warning light, energizes the solenoid valve that permits the
flow of the oil necessary for the operation of the hammer; if the
push button (4) is pressed a second time, the solenoid valve is
deenergized and the oil flow is interrupted.
For operation, the hammer is provided with a specific control.
(See the specific operation manual).
5
10
15
20
25
30
RPM x 100
electronic
RWA03830
4
RWA03840
3
2
1
Summary of Contents for 97SF11205
