PRECAUTIONS TO BE TAKEN WHEN WORKING
40
2.4.11 PARKING THE MACHINE
RWA26110
RWA26120
RWA31250
RWA34810
•
Park the machine on firm and level ground. If this is not possi-
ble and it is necessary to park on a slope, position the ma-
chine with the front bucket directed downwards and carry out
the following operations:
1 - While keeping the machine stopped with the brakes, apply
the parking brake.
2 - Dump the front bucket to the unloading position and lower
the arms until the teeth are driven into the ground.
3 - Carry out the same operations with the backhoe bucket.
4 - Stop the engine.
5 - Put wedges or safety blocks under the front and rear
wheels.
•
Always rest the work equipment on the ground; if it is neces-
sary to park with raised arms, make sure that the safety locks
are engaged.
•
Always engage the control lever safety locks.
IMPORTANT
☞
•
If the machine is equipped with backhoe servo controls,
always engage the control locking safety device by press-
ing the relevant switch, see “3.3.5.2 MACHINE CONTROLS
(Version with servo controls)”, pos. 26.
•
When leaving the machine, apply the parking brake, make
sure that the cab windows are closed, remove the ignition key
and finally lock the doors.
•
If it is necessary to park on public roads, provide for signalling
the presence of the machine according to the local regulations
in force (signalling fires, fences, road works ahead, alternated
direction and direction signs, etc.).
RWA35030
Summary of Contents for 97SF11205
