98
INSTRUMENTS AND CONTROLS
20 - STEERING WHEEL ADJUSTMENT LOCKING
LEVER
DANGER
•
Adjust the steering wheel while seated in the driving posi-
tion. The machine must be completely still and the engine
must be off.
•
Before using the machine, make sure that both the steer-
ing wheel and the adjusting lever are completely locked.
Non-compliance with these instructions may lead to seri-
ous accidents.
This lever is positioned on the left side of the steering wheel and
allows the latter to be adjusted according to the physical charac-
teristics of the operator.
It is possible to choose among different positions; for the adjust-
ment, proceed as follows:
1 - After stopping the machine and the engine, turn the lever
(20) anticlockwise to release the steering wheel (see Fig. A).
2 - Adjust the steering wheel by moving it forward and backward
until finding the desired position (see Fig. B).?Turn the lever
(20) clockwise to lock the steering wheel in the desired posi-
tion (see Fig. C).
IMPORTANT
☞
•
If the stroke of the lever (20) isn’t sufficient to lock the
steering wheel completely, pull the lever (20) as indicated
by the arrow (D). At this point, shift the lever (20) to its
original position by repeating the operation and turning it
clockwise or anticlockwise.
RWA37910
20
A
D
RWA38590
B
C
20
D
RWA37900
Summary of Contents for Avance WB91R-2
