114
GUARDS, CAB AND DRIVER’S SEAT
3 - Rotate the rear side windows towards the front of the ma-
chine, until engaging the coupling (6) in the rubber block (7),
as shown in Fig. E.
To close the rear side windows, repeat the operations described
above in the reverse order, remembering that the lever (3) must
always be engaged in the lower coupling pin (4) as shown in Fig.
A.
IMPORTANT
☞
•
When the rear windows are partially or completely closed,
they must always be engaged in the lower (4) or upper (5)
coupling pin by means of the lever (3).
•
When the rear windows are rotated towards the front of
the machine in order to open them completely, make sure
that they are perfectly locked in the relevant rubber blocks
(7).
•
Periodically lubricate the rubber blocks (7) with specific
greases, in order to facilitate the coupling operation.
7
E
6
RWAB0210
The cab access doors can be opened even partially; the partial
opening is obtained by fitting the locking devices (8) in the han-
dle support recesses (9).
IMPORTANT
☞
•
The doors must always be secured with the locking devic-
es (8) or closed.
RWAB0220
8
RWAB0230
9
Summary of Contents for Avance WB91R-2
