MAINTENANCE PLAN
200
4.7.6.d
LUBRICATING THE FRONT AXLE JOINTS
CENTRAL COUPLING
4.7.6.e
CHECKING THE TYRE PRESSURE
The lubrication points (1) of the wheel joints are indicated in the
figure and it is important to remember that they are located in
symmetrical positions, while the central joint is lubricated by
means of a grease nipple (2) positioned on the frame.
The lubrication must be carried out after carefully cleaning the
grease nipples, by applying the greasing pump supplied together
with the machine and using the prescribed grease.
(See “4.3 FUEL, COOLANT AND LUBRICANTS”).
Once the lubrication has been carried out, remove the contami-
nated grease that may have spread out of the joints and of the
central coupling.
RWAA0330
1
1
2
RWA03430
DANGER
•
Inflate the tyres only after positioning them in a protection
cage.
•
To inflate the tyre, stand beside the external belt.
•
Do not exceed the pressures prescribed in chapter “5.1
TECHNICAL DATA”.
This check is indispensable to preserve the tyres, keep them ef-
ficient over time and make them last longer.
The correct pressures are indicated in the specifications. (See
“5.1 TECHNICAL DATA”).
While checking the pressure, check also the conditions of the
tread and sidewalls.
RWA01680
Summary of Contents for Avance WB91R-2
