manualshive.com logo in svg

Komatsu 500001, Shop Manual

The Komatsu 500001 Shop Manual is an invaluable resource for owners and technicians. This comprehensive manual covers every aspect of maintenance, repair, and troubleshooting for the Komatsu 500001. Visit our website to download this manual for free and empower yourself with the knowledge to keep your equipment running smoothly.

Share
Download
background image

RELATED INFORMATION ON TESTING AND ADJUSTING ................................................................ 30-10

TOOLS FOR TESTING AND ADJUSTING..................................................................................... 30-10
SKETCH OF TOOLS FOR TESTING AND ADJUSTING ............................................................... 30-16

ENGINE AND COOLING SYSTEM....................................................................................................... 30-17

TEST ENGINE SPEED .................................................................................................................. 30-17
TEST BOOST PRESSURE............................................................................................................ 30-20
TEST EXHAUST GAS COLOR...................................................................................................... 30-22
TEST AND ADJUST VALVE CLEARANCE .................................................................................... 30-25
TEST COMPRESSION PRESSURE.............................................................................................. 30-27
TEST BLOWBY PRESSURE ......................................................................................................... 30-32
TEST ENGINE OIL PRESSURE .................................................................................................... 30-34
TEST EGR VALVE AND VGT OIL PRESSURE ............................................................................. 30-35
TEST FUEL PRESSURE ............................................................................................................... 30-37
TEST FUEL DISCHARGE, RETURN AND LEAKAGE ................................................................... 30-43
BLEEDING AIR FROM FUEL SYSTEM ......................................................................................... 30-49
TEST FUEL CIRCUIT FOR LEAKAGE .......................................................................................... 30-50
HANDLE CYLINDER CUT-OUT MODE OPERATION.................................................................... 30-52
HANDLE NO-INJECTION CRANKING OPERATION ..................................................................... 30-53
TEST AND ADJUST AIR CONDITIONER COMPRESSOR BELT TENSION ................................. 30-54
TEST COOLING FAN SPEED  ...................................................................................................... 30-56
WRITE ASH IN SOOT ACCUMULATION CORRECTION TO ENGINE CONTROLLER ................ 30-57
TEST SCR RELATED FUNCTIONS............................................................................................... 30-58
CLEAN AdBlue/DEF TANK ............................................................................................................ 30-83
BLEED AIR FROM COOLANT CIRCUIT OF AdBlue/DEF TANK ................................................... 30-87

POWER TRAIN..................................................................................................................................... 30-89

TEST SWING CIRCLE BEARING CLEARANCE ........................................................................... 30-89

UNDERCARRIAGE AND FRAME......................................................................................................... 30-90

TEST AND ADJUST TRACK TENSION......................................................................................... 30-90

HYDRAULIC SYSTEM.......................................................................................................................... 30-92

RELEASE REMAINING PRESSURE FROM HYDRAULIC SYSTEM............................................. 30-92
TEST AND ADJUST OIL PRESSURE IN WORK EQUIPMENT, SWING, AND TRAVEL CIRCUITS........

................................................................................................................................................... 30-93

TEST OIL PRESSURE OF CONTROL CIRCUIT ..........................................................................30-103
TEST AND ADJUST OIL PRESSURE IN PUMP PC CONTROL CIRCUIT ...................................30-105
TEST AND ADJUST OIL PRESSURE IN PUMP LS CONTROL CIRCUIT....................................30-108
TEST OUTLET PRESSURE OF SOLENOID VALVE ....................................................................30-115
TEST PPC VALVE OUTLET PRESSURE .....................................................................................30-119
ADJUST WORK EQUIPMENT AND SWING PPC VALVES ..........................................................30-121
TEST PUMP SWASH PLATE SENSOR........................................................................................30-122
TEST THE PARTS CAUSING HYDRAULIC DRIFT IN WORK EQUIPMENT................................30-123
TEST OIL LEAKAGE ....................................................................................................................30-125
BLEED AIR FROM HYDRAULIC CIRCUIT ...................................................................................30-128

CAB AND ITS ATTACHMENTS ...........................................................................................................30-132

TEST CAB TIPPING STOPPER ...................................................................................................30-132
METHOD FOR ADJUSTING MIRRORS .......................................................................................30-133

ELECTRICAL SYSTEM .......................................................................................................................30-139

SET AND OPERATE MACHINE MONITOR..................................................................................30-139
METHOD FOR STARTING UP KOMTRAX TERMINAL ................................................................30-216
ADJUST REARVIEW CAMERA ANGLE .......................................................................................30-221
HANDLE VOLTAGE CIRCUIT OF ENGINE CONTROLLER .........................................................30-224
HANDLE BATTERY DISCONNECT SWITCH ...............................................................................30-225
TEST DIODES ..............................................................................................................................30-226

Pm CLINIC...........................................................................................................................................30-227

Pm CLINIC SERVICE ...................................................................................................................30-227

40 TROUBLESHOOTING .............................................................................................................................. 40-1

CONTENTS ............................................................................................................................................ 40-2
ABBREVIATION LIST ........................................................................................................................... 40-12
RELATED INFORMATION ON TROUBLESHOOTING ......................................................................... 40-17

INDEX

00 INDEX AND FOREWORD

00-4

PC210LC-11

Find manuals at https://best-manuals.com

Summary of Contents for 500001






























































Reviews:

No comments

Related manuals for 500001

jcb JC160 Quick Reference Manual preview
JC160
Brand: jcb Pages: 3
Komatsu Utility 395F6001 Operation & Maintenance Manual preview
395F6001
Brand: Komatsu Utility Pages: 254
Howard 350 User Manual preview
350
Brand: Howard Pages: 17

Brands by name

Popular brands

Load more brands