F6: Validates the change and returns the display to “MC Setting” screen.
REMARK
Semi-auto mode is not canceled while semi-auto mode is in operation even if GNSS receiver is under initi-
alization.
When GNSS receiver is under initialization, IMU presumes the machine self position, and keeps updating
the design surface data within the set range of time and swing angle. The accuracy of construction may be
degraded.
Semi-auto mode is not canceled while this setting is enabled. You can continue to use machine control, but
we recommend not to operate the machine until GNSS receiver completes the initialization for safety rea-
sons.
METHOD FOR SETTING GNSS FLUCTUATION REDUCTION FILTER
“GNSS Fluctuation Reduction Filter” can be set to ON or OFF.
1.
Select the “GNSS Fluctuation Reduction Filter” (6) on the
“Semi-auto Adjustment” setting screen, and press the
switch “F6”.
F3: Moves to the next item (1 line below). When it is on the
last line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is
on the first line, it moves to the last line.
F5: Returns the display to “MC Setting” screen.
F6: Changes the setting of selected item.
“GNSS Fluctuation Reduction Filter” setting screen is dis-
played.
2.
Select ON or OFF of “GNSS Fluctuation Reduction Filter”
setting.
It is set to ON when machine is shipped from plant.
REMARK
This function is used to reduce the fluctuation of GNSS co-
ordinates when machine is stopped.
Wobbling of work equipment in semi-auto mode can be re-
duced.
Filtering function automatically stops during swing or trav-
el.
F3: Moves to the next item (1 line below). When it is on the last line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is on the first line, it moves to the last line.
F5: Cancels the change and returns the display to “MC Setting” screen.
F6: Validates the change and returns the display to “MC Setting” screen.
MACHINE MONITOR
SETTING
7-194
Summary of Contents for A31001
