9.
Check that the lever (B) is securely at LOCK position.
• The lock is engaged if the arrow on lock case (F)
matches the position of the arrow on lever (B).
Check visually.
• The lock is not engaged if the arrow on the lock case
(F) does not match the position of the arrow on the
lever (B).
Repeat the operation in step 5 to engage the lock.
10. Adjust the control box to the position for you to see it well.
11. Turn the handle (2) of mount to screw it in, and fix the con-
trol box so that it does not move.
12. Check that the clearance with the control box is enough for
the work equipment lever when it is moved.
(Keep 40 mm {1.6 in} or more for the clearance (a).)
METHOD FOR CLOSING CAB FRONT WINDOW
k
k
CAUTION
When closing the cab front window, lower it slowly and be careful not to get your hand caught.
1.
Lower the work equipment to the level ground, and set the
lock lever (1) securely to LOCK position (L).
2.
Stop the engine.
3.
Turn the handle (2) of mount to loosen it.
OPERATION
EXPLANATION OF COMPONENTS
3-29
Summary of Contents for A31001
