FOREWORD
SAFETY
00-4
WB140PS-2N WB150PS-2N
●
When installing hoses and wires, be sure that they will
not be damaged by contact with other parts when the
machine is being operated.When installing high pres-
sure hoses, make sure that they are not twisted. Dam-
aged tubes are dangerous, so be extremely careful when
installing tubes for high pressure circuits. Also check
that connecting parts are correctly installed.
10. When assembling or installing parts, always use the
specified tightening torques. When installing protective
parts such as guards, or parts which vibrate violently or
rotate at high speed, be particularly careful to check that
they are installed correctly.
11. When aligning two holes, never insert your fingers or
hand. Be careful not to get your fingers caught in a hole.
12. When measuring hydraulic pressure, check that the
measuring tool is correctly assembled before taking any
measurements.
13. Take care when removing or installing the tracks of
track-type machines. When removing the track, the
track separates suddenly, so never let anyone stand at
either end of the track.
14. When jump starting the machine, only use a machine of
similar size and voltage. Never use a arc welder or other
electrical generating equipment to jump start the
machine. Carefully review the safety and procedures for
jump starting the machine.
Find manuals at https://best-manuals.com
