W
ALK
-A
ROUND
BR580JG
-1
MOBILE CRUSHER
BR580JG
-1
M
O B I L E
C
R U S H E R
3
2
Photo may include optional equipment.
G
enuine
A
nswer for
L
and
and
E
nvironment
O
ptimization
HORSEPOWER
Gross: 262.5 kW 352 HP @ 1900 rpm
Net: 257 kW 345 HP @ 1900 rpm
OPERATING WEIGHT
49000 - 51000 kg
108,000 - 112,440 lb
The newly designed Komatsu BR580JG-1 mobile
crusher looks simple but is very powerful.
The upgraded Komatsu designed crusher offers you
amazing production capacity of
MAX 460 ton/h
(507 U.S. ton/h).
Newly designed vibrating grizzly feeder
The vibrating grizzly feeder moves the material
elliptically, so the material can be effectively separated
and evenly fed into the jaw.
High-performance jaw
The KCJ4430 large-capacity jaw crusher
guarantees maximum crushing capacity in this
class along with ease of maintenance. In addition,
Komatsu’s locking cylinder mechanism allows
you to change the discharge clearance with a
simple one-touch adjustment and also facilitates
the removal of clogged foreign material from the
discharge side.
Large-capacity hopper
The 2625 mm 8'7" x 4400 mm 14'5" feedhopper is
accessible from three sides for material loading.
HydrauMind hydraulics and
all-hydraulic drive system
Fully hydraulic drive system gets you
working right away. The HydrauMind
system supplies the optimal amount
of oil through load-sensing and
pressure-compensated valves.
Outstanding mobility
Hydraulic steering and high-travel speed make the
machine easy to relocate. The BR580JG-1 uses the
same track undercarriage as Komatsu’s hydraulic
excavators.
High-speed, large-capacity
conveyor belt
A 1050 mm 42" wide conveyor belt travels at
120 m 394' per minute.
The discharge height is 3000 mm 9'10".
SAA6D125E-5 turbocharged
after-cooled diesel engine
provides 257 kW / 345 HP for superior
crushing power. EPA Tier 3 and EU Stage
3A emission regulations certified.
Hydraulic conveyor lifter
in the up position
ensures adequate ground clearance even on rough
ground.
The mobile crusher uses a new interlock system
that controls the travel and the operation
(crushing), depending on the conveyor’s position.
Sprinkler nozzles
and a connector
are standard at the jaw entry.
Emergency shut-off buttons
are installed
on both the left and right sides of the chassis, on
the control panel, and on the radio remote
control (option).
