ECO GUIDANCE
The guidance for energy saving operation to reduce the fuel
consumption may be displayed during operation.
The details of the guidance are as follows:
Idling Stop Guidance
If no operation is performed for more than 5 minutes, and the
engine is idling, the idling stop message is displayed on the
machine monitor. When waiting for work or taking short break,
stop the engine to reduce unnecessary fuel consumption.
• The idling stop guidance goes out if any lever is operated
again or switch F5 is pressed.
• For the auto idle stop function, see “AUTO IDLE STOP
Guidance To Avoid Hydraulic Relief
If the hydraulic oil is kept relieved for more than 10 seconds
during operation, the hydraulic relief deterrence message is
displayed on the machine monitor.
The hydraulic relief deterrence message goes out 5 seconds
later or when switch F5 is pressed.
E Mode Recommendation Guidance
If light-load work is continued for more than 10 minutes in P
mode, E mode recommendation message is displayed. When
working on light load, set the operation mode to E to reduce
unnecessary fuel consumption.
E mode recommendation guidance goes out more than 5 sec-
onds after or when switch F5 is pressed.
EXPLANATION OF COMPONENTS
OPERATION
3-32
Summary of Contents for D155AX-8E0
