background image

11

10

HD325

-7

OFF-HIGHWAY TRUCK

HD325

-7

O

F F

- H

I G H W A Y

T

R U C K

S

PECIFICATIONS

AXLES

Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-floating
Final drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Ratios:

Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.125
Planetary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.737

TRANSMISSION

Torque converter . . . . . . . . . . . . . . . . 3-elements, 1-stage, 2-phase
Transmission . . . . . . . . . . . . . . . . . . . Full-automatic, planetary type
Speed range. . . . . . . . . . . . . . . . . . 7 speeds forward and 1 reverse
Lockup clutch . . . . . . . . . . . . . . . . . . . . . . . . Wet, single-disc clutch
Forward . . . . . . . . . . . . . . . . . . . Torque converter drive in 1st gear,

direct drive in 1st lockup and all higher gears

Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . Torque converter drive
Shift control . . . . . . . . . . . . . . Electronic shift control with automatic

clutch modulation in all gear

Maximum travel speed  . . . . . . . . . . . . . . . . . . .

70 km/h

43.5 mph

ENGINE

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D140E-5
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle
Aspiration . . . . . . . Turbo-charged,air-to-air after-cooled,cooled EGR
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore x stroke . . . . . . . . . . . . . . . . . . . 

140 mm x 165 mm 

5.5" x 6.5"

Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . 

15.24 ltr

930 in

3

Horsepower

SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . Gross 

386 kW

518 HP

ISO 9249 / SAE J1349 . . . . . . . . . . . . . . . . . Net 

371 kW

498 HP

Rated rpm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,000 rpm

Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical
Maximum torque . . . . . . . . . . . . . . . 

2167 N-m 221 kg•m

1,600 lb. ft

Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct injection
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronically controlled
Lubrication system

Method . . . . . . . . . . . . . . . . . . . . . . . Gear pump, force-lubrication
Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow type

Air cleaner . . . . . . . . . . . . . . . . . . . . . Dry type with double elements

and precleaner, plus dust indicator

SUSPENSION SYSTEM

Independent, hydropneumatic suspension cylinder with fixed throttle
to dampen vibration.
Effective cylinder stroke (front suspension) . . . . . . . . . . 

250 mm

9.8"

Rear axle oscillation:

Oil stopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.8°
Mechanical stopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1°

MAIN FRAME

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-sectioned structure

STEERING SYSTEM

Type . . . . . . . . . . . . . . . . . . . . . . . . . . Fully hydraulic power steering

with two double-acting cylinders

Supplementary steering . . . . . . . . . . . . . . . . . . . . . . . Manual control 

(meets ISO 5010 and SAE J1511)

Minimum turning radius . . . . . . . . . . . . . . . . . . . . . . . . . . 

7.2 m

23'7"

Maximum steering angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43°

BRAKES

Brakes meet ISO 3450 standard.
Service brakes:

Front . . . . . . . . . . . . . . . . . Fully hydraulic control, caliper disc type
Rear . . . . . . . . . . . . . . Fully hydraulic, oil-cooled, multiple-disc type

Parking brake . . . . . . . . . . . . . . . . . Spring applied, caliper disc type
Retarder . . . . . . Oil-cooled, multiple-disc rear brakes act as retarder.
Secondary brake . . . . . . . . . . . . . . . . . . . . . Manual pedal operation.

When hydraulic pressure drops below the rated level,

parking brake is automatically actuated.

Brake surface

Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

968 cm

2

150 in

2

Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

50847 cm

2

7,881 in

2

WEIGHT (APPROXIMATE)

Empty weight . . . . . . . . . . . . . . . . . . . . . . . . . . . 

31600 kg

69,700 lb

Gross vehicle weight with 32 metric ton

(35 U.S.ton) payload . . . . . . . . . . . . . . . . . . . 

63680 kg

140,390 lb

Max. gross vehicle weight . . . . . . . . . . . . . . . . . 

69280 kg

152,740 lb

Not to exceed max. gross vehicle weight, including options, fuel 
and payload.

Weight distribution:

Empty: Front axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51.7%

Rear axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48.3%

Loaded: Front axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33%

Rear axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67%

BODY

Capacity:

Struck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

18 m

3

23.5 yd

3

Heaped (2:1, SAE) . . . . . . . . . . . . . . . . . . . . . . . . 

24 m

3

31.4 yd

3

Payload,maximum . . . . . . . . . . . . . . . 

36.5 metric tons

40 U.S. tons

rated. . . . . . . . . . . . . . . . . . . . 

32 metric tons

35 U.S. tons

Material . . . . . . . . . . . . . . . . . . . . . . . . . . . 

130 kg/mm

2

184,900 psi

high-tensile-strength steel

Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V-shape body
Material thickness:

Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

19 mm

0.75"

Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

12 mm

0.47"

Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

9 mm

0.35"

Target area 

(inside length x width) . . . . . . . 

5500 mm x 3380 mm

18'1" x 11'1"

Dumping angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48°
Height at full dump . . . . . . . . . . . . . . . . . . . . . . . . . 

7925 mm

26'00"

Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exhaust heating

HYDRAULIC SYSTEM

Hoist cylinder . . . . . . . . . . . . . . . . . . . . Twin, 2-stage telescopic type
Relief pressure . . . . . . . . . . . . . . . 

20.6 MPa  210 kg/cm

2

2,990 psi

Hoist time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 sec

CAB

Dimensions comply with ISO 3471 ROPS (Roll-Over Protective
Structure) standard, and ISO 3449 FOPS standard.

TIRES

Standard tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.00-33-32PR

SERVICE REFILL CAPACITIES

Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

484 ltr.

127.9 U.S. Gal

Engine oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

50 ltr.

13.2 U.S. Gal

Torque converter, transmission and

retarder cooling . . . . . . . . . . . . . . . . . . . . . . . 

90 ltr.

23.8 U.S. Gal

Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

45 ltr.

11.9 U.S. Gal

Final drives (total) . . . . . . . . . . . . . . . . . . . . . . . . 

30 ltr.

7.9 U.S. Gal

Hydraulic system . . . . . . . . . . . . . . . . . . . . . . . 

129 ltr.

34.1 U.S. Gal

Suspension (total) . . . . . . . . . . . . . . . . . . . . . . 

44.2 ltr.

11.7 U.S. Gal

DIMENSIONS 

4760mm 

15'7"

3660mm 

12'0"

3150mm 

10'4"

3660mm 

12'0"

645 mm

2'1"

4150mm 

13'7"

4000mm 

13'1"

3850mm 

12'8"

1985mm 

6'6"

3750mm 

12'4"

8465mm 

27'9"

2730mm 

8'11"

480mm 

1'7"

3220mm 

10'7"

7925mm 

26'0"

8000mm 

26'3"

5500mm

18'1"

7895mm 

25'11"

48

18.0

0-33 

18.0

0-33 

7200mm 

23'7"

2550mm 

8'4"

3380mm 

11'1"

588mm 

1'11"

F1

F2

F3

F4

F5

F6

F7

70

60

50

40

30

20

10

0

0.5

3

5

6

7

8

9

10

20

30

40

50

2

1

4

35.0

30.0

25.0

20.0

15.0

14.0
13.0

12.0
11.0
10.0
9.0
8.0 

7.0

6.0

5.0

4.0

3.0

2.0

100

60

80

40

30

20

10

5

4

3

2

1

RIMPULL

0

10

15

20

25

30

35

40

TRAVEL  SPEED

MPH

km/h

LOADED

EMPTY

GROSS  WEIGHT

x10

3

 lb

 x10

3

 kg

x10

3

 lb  x10

3

 kg

5

TOTAL RESISTANCE (GRADE + ROLLING)  (%)

70

80

90

100 110 120 130

150

180

30

40

50

60

70

80

90

TRAVEL PERFORMANCE

0

10

0

10

20

30

40

50

60

20

30

40

50

60

70

80

90

100 km/h

MPH

TRAVEL SPEED

-10

-15

-20

-25

-30

-5

TOTAL RESISTANCE (GRADE + ROLLING)  (%)

0

0

50

100

150

200

10

20

30

40

50

60

70

80

90

100

GROSS WEIGHT

x10

3

 lb

 x10

3

 kg

 LOADED

EMPTY

F1

F2

F3

F4

F5

F6

F7

0

10

0

10

20

30

40

50

60

20

30

40

50

60

70

80

90

100 km/h

MPH

TRAVEL SPEED

-10

-15

-20

-25

-30

-5

TOTAL RESISTANCE (GRADE + ROLLING)  (%)

0

0

50

100

150

200

10

20

30

40

50

60

70

80

90

100

GROSS WEIGHT

x10

3

 lb

 x10

3

 kg

EMPTY

F1

F2

F3

F4

F5

F6

F7

 LOADED

Grade distance: Continuous Descent

Grade distance: 450 m (1,480 ft)

To determine travel performance: Read from

gross weight down to the percent of total

resistance. From this weight-resistance point,

read horizontally to the curve with the 

highest obtainable speed range, then down

to maximum speed. Usable rimpull depends

upon traction available and weight on drive

wheels.

To determine brake performance: These

curves are provided to establish the 

maximum speed and gearshift position

for safer descents on roads with a given 

distance. Read from gross weight down

to the percent of total resistance. From

this weight resistance point, read 

horizontally to the curve with the highest

obtainable speed range, then down to

maximum descent speed the brakes can

safely handle without exceeding cooling

capacity.

BRAKE PERFORMANCE

Summary of Contents for HD325-7







Reviews: