PRECAUTIONS TO BE TAKEN WHEN WORKING
32
2.4 PRECAUTIONS TO BE TAKEN WHEN WORKING
2.4.1 STARTING
THE
ENGINE
2.4.2 CHECK THE DIRECTION BEFORE
STARTING THE MACHINE
2.4.3 CHECKS FOR TRAVELLING IN RE-
VERSE
•
Before getting on the machine, walk around it and check for people and objects that might be in the way.
•
Do not start the engine if warning plates have been attached to the control levers.
•
When starting the engine, sound the horn as an alert signal.
•
Start the engine only when seated with fastened safety belt.
•
Do not allow anyone to get on the machine.
•
Before operating the machine travel levers, check the position of
the blade.
If the blade is positioned on the back side of the machine, the
travel levers must be operated in the opposite direction.
In this condition, be careful not to confuse the travel movements
while using the machine (See “3.6.5 HOW TO MOVE THE MA-
CHINE”).
RYA14820
RWA06760
•
When operating in areas that may be hazardous or have poor
visibility, designate a person to direct the movements of the ma-
chine and traffic on the work site.
•
Make sure that no unauthorized person is within the machine
operating radius or in its travel direction.
If necessary, put up appropriate fences.
•
Before moving the machine, sound the horn in order to warn the
persons near the work area.
•
There are blind spots behind the machine, which cannot be
seen and where someone may be standing: therefore, it is nec-
essary to make sure that there is no one behind the machine
before travelling in reverse.
RWA06770
Summary of Contents for PC110R-1
