10
ENGINE
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D107E-1
Type . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
107 mm
4.21"
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
124 mm
4.88"
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . .
6.69 ltr
408 in
3
Horsepower:
SAE J1995. . . . . . . . . . . . . . . . . . . . . . . . . Gross
116 kW
155 HP
ISO 9249 / SAE J1349. . . . . . . . . . . . . . . . . . Net
110 kW
148 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 rpm
Fan drive method for radiator cooling . . . . . . . . . . . . . . . Mechanical
Governor . . . . . . . . . . . . . . . . . . . . . . . . All-speed control, electronic
EPA Tier 3 and EU Stage 3A emission certified
HYDRAULICS
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design)
system, closed-center system with load sensing valves and
pressure compensated valves
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 5
Main pump:
Type . . . . . . . . . . . . . . . . . . . . . Variable displacement piston type
Pumps for . . . . . . . . Boom, arm, bucket, swing, and travel circuits
Maximum flow. . . . . . . . . . . . . . . . . .
439 ltr/min
116 U.S. gal/min
Supply for control circuit . . . . . . . . . . . . . . . . . Self-reducing valve
Hydraulic motors:
Travel . . . . . . . . . . . . . . . 2 x axial piston motor with parking brake
Swing . . . . . . . . . . 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits . . . . . . . . . . . .
37.3 MPa
380 kgf/cm
2
5,400 psi
Travel circuit . . . . . . . . . . . . . . . .
37.3 MPa
380 kgf/cm
2
5,400 psi
Swing circuit . . . . . . . . . . . . . . . .
28.9 MPa
295 kgf/cm
2
4,190 psi
Pilot circuit . . . . . . . . . . . . . . . . . . . . .
3.2 MPa
33 kgf/cm
2
470 psi
Hydraulic cylinders:
(Number of cylinders – bore x stroke x rod diameter)
Boom . . . . . .
2 – 120 mm x 1334 mm x 85 mm
4.7" x 52.5" x 3.3"
Arm . . . . . . .
1 – 135 mm x 1490 mm x 95 mm
5.3" x 58.7" x 3.7"
Bucket: . . . . . . . . . . . . . . . . for
2.41 m
7'11" and
2.93 m
9'7" Arm
1 – 115 mm x 1120 mm x 80 mm
4.5" x 44.1" x 3.2"
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for
1.84 m
6'0" Arm
1 – 125 mm x 1110 mm x 85 mm
4.9" x 43.7" x 3.3"
DRIVES AND BRAKES
Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Maximum drawbar pull . . . . . . . . . . . . . .
178 kN
18200 kg 40,120 lb
Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35°
Maximum travel speed: High . . . . . . . . . . . . . . . . .
5.5 km/h
3.4 mph
(Auto-Shift)
Mid. . . . . . . . . . . . . . . . . .
4.1 km/h
2.5 mph
(Auto-Shift)
Low . . . . . . . . . . . . . . . . .
3.0 km/h
1.9 mph
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake
SWING SYSTEM
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Holding brake/Swing lock . . . . . . . . . . . . . . . . Mechanical disc brake
Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4 rpm
UNDERCARRIAGE
Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame
Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
Seal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track
Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Number of shoes (each side):
PC200-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
PC200LC-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Number of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . 2 each side
Number of track rollers (each side):
PC200-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PC200LC-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
COOLANT AND LUBRICANT
CAPACITY
(REFILLING)
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
400 ltr
105.7 U.S. gal
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20.4 ltr
5.4 U.S. gal
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.1 ltr
6.1 U.S. gal
Final drive, each side . . . . . . . . . . . . . . . . . . . . . .
3.3 ltr
0.9 U.S. gal
Swing drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.6 ltr
1.7 U.S. gal
Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . .
135 ltr
35.7 U.S. gal
OPERATING WEIGHT
(APPROXIMATE)
Operating weight including
5700 mm
18'8" one-piece boom,
2925 mm
9'7" arm, SAE heaped
0.80 m
3
1.05 yd
3
backhoe bucket,
rated capacity of lubricants, coolant, full fuel tank, operator, and
standard equipment.
PC200-8
PC200LC-8
Operating
Ground
Operating
Ground
Shoes
Weight
Pressure
Weight
Pressure
500 mm
19400 kg
53.0 kPa
0.54 kgf/cm
2
—
—
20"
42,770 lb
7.68 psi
600 mm
19500 kg
45.1 kPa
20630 kg
43.1 kPa
0.46 kgf/cm
2
0.44 kgf/cm
2
24"
42,990 lb
6.54 psi
45,480 lb
6.26 psi
700 mm
19750 kg
39.2 kPa
20900 kg
37.3 kPa
0.40 kgf/cm
2
0.38 kgf/cm
2
28"
43,540 lb
5.69 psi
46,080 lb
5.40 psi
800 mm
20010 kg
34.3 kPa
21180 kg
33.3 kPa
0.35 kgf/cm
2
0.34 kgf/cm
2
31.5"
44,110 lb
4.98 psi
46,690 lb
4.83 psi
900 mm
21460 kg
29.4 kPa
—
—
0.30 kgf/cm
2
35.5"
47,310 lb
4.27 psi
11
M
G
C
E
H,Q
A
D,L
K
I
N
F
O
J
B
P
G.L.
H
F
G
2440(8')
A
B
C
E D
0
-1
-2
-3
-4
-5
-6
-7
0
1
2
3
4
5
6
7
8
9
10
5
6
7
8
9
10
11
12
11
(m)
1
2
3
4
(m)
Bucket Capacity
Number
(heaped)
Width
Weight
Arm Length
SAE, PCSA
CECE
Without Side Cutters
With Side Cutters
With Side Cutters
of Teeth
1.84 m
6'0"
2.41 m
7'11"
2.93 m
9'7"
0.50 m
3
0.65 yd
3
0.45 m
3
0.59 yd
3
750 mm
29.5"
875 mm
34.4"
478 kg
1,050 lb
3
0.80 m
3
1.05 yd
3
0.70 m
3
0.92 yd
3
1045 mm
41.1"
1170 mm
46.1"
635 kg
1,400 lb
5
0.93 m
3
1.22 yd
3
0.80 m
3
1.05 yd
3
1200 mm
47.2"
1325 mm
52.2"
696 kg
1,530 lb
5
□
□
1.05 m
3
1.37 yd
3
0.90 m
3
1.18 yd
3
1330 mm
52.4"
1455 mm
57.3"
757 kg
1,670 lb
6
□
□
X
1.17 m
3
1.53 yd
3
1.00 m
3
1.31 yd
3
1450 mm
57.1"
—
940 kg
2,070 lb
6
X
Arm
1840 mm
6'0"
2410 mm
7'11"
2925 mm
9'7"
A
Max. digging height
9500 mm
31'2"
9800 mm
32'2"
10000 mm
32'10"
B
Max. dumping height
6630 mm
21'9"
6890 mm
22'7"
7110 mm
23'4"
C
Max. digging depth
5380 mm
17'8"
6095 mm
20'0"
6620 mm
21'9"
D
Max. vertical wall
digging depth
4630 mm
15'2"
5430 mm
17'10"
5980 mm
19'7"
E
Max. digging depth
of cut for 8' level
5130 mm
16'0"
5780 mm
19'0"
6370 mm
20'11"
F
Max. digging reach
8850 mm
29'1"
9380 mm
30'9"
9875 mm
32'5"
G
Max. digging reach
at ground level
8660 mm
28'5"
9190 mm
30'2"
9700 mm
31'10"
H
Min. swing radius
3010 mm
9'11"
3090 mm
10'2"
3040 mm
10'0"
Bucket digging force
157 kN
138 kN
138 kN
at power max.
16000 kgf/35,270 lb
14100 kgf/31,080 lb
14100 kgf/31,080 lb
Arm crowd force
139 kN
124 kN
101 kN
at power max.
14200 kgf/31,300 lb
12600 kgf/27,780 lb
10300 kgf/22,710 lb
Bucket digging force
177 kN
149 kN
149 kN
at power max.
18000 kgf/39,680 lb
15200 kgf/33,510 lb
15200 kgf/33,510 lb
Arm crowd force
145 kN
127 kN
108 kN
at power max.
14800 kgf/32,630 lb
13000 kgf/28,660 lb
11000 kgf/24,250 lb
Arm Length
1840 mm
6'0"
2410 mm
7'11"
2925 mm
9'7"
A
Overall length
9480 mm
31'1"
9495 mm
31'2"
9425 mm
30'11"
B
Length on ground (transport): PC200-8
6270 mm
20'7"
5700 mm
18'8"
4815 mm
15'10"
PC200LC-8
6455 mm
21'2"
5885 mm
19'4"
5000 mm
16'5"
C
Overall height (to top of boom)
2985 mm
9'10"
3190 mm
10'6"
2970 mm
9'9"
WORKING RANGE
DIMENSIONS
: General purpose use, density up to
1.8 ton/m
3
1.52 U.S. ton/yd
3
: Light duty work, density up to
1.2 ton/m
3
1.01 U.S. ton/yd
3
□
: General purpose use, density up to
1.5 ton/m
3
1.26 U.S. ton/yd
3
X
: Not usable
BACKHOE BUCKET, ARM, AND BOOM COMBINATION
ISO rating SAE rating
PC200-8
PC200LC-8
D
Overall width
2800 mm
9'2"
3080 mm
10'1"
E
Overall height (to top of cab)
3040 mm
10'0"
3040 mm
10'0"
F
Ground clearance, counterweight
1085 mm
3'7"
1085 mm
3'7"
G
Ground clearance (minimum)
440 mm
1'5"
440 mm
1'5"
H
Tail swing radius
2750 mm
9'0"
2750 mm
9'0"
I
Track length on ground
3275 mm
10'9"
3655 mm
12'0"
J
Track length
4070 mm
13'4"
4450 mm
14'7"
K
Track gauge
2200 mm
7'3"
2380 mm
7'10"
L
Width of crawler
2800 mm
9'2"
3080 mm
10'1"
M
Shoe width
600 mm
24"
700 mm
28"
N
Grouser height
26 mm
1.0"
26 mm
1.0"
O
Machine cab height
2095 mm
6'10"
2095 mm
6'10"
P
Machine cab width
2710 mm
8'11"
2710 mm
8'11"
Q
Distance, swing center to rear end
2710 mm
8'11"
2710 mm
8'11"
S
PECIFICATIONS
HYDRAULIC EXCAVATOR
PC200
-8
0
H
Y D R A U L I C
E
X C A V A T O R
PC200
-8
