Control method in mode P, E, ATT-P, and ATT-E
Working mode
Matching point
P, ATT-P (during operation)
241 kW/1720 rpm {323 HP/1720 rpm}
E, ATT-E (during operation)
216 kW/1700 rpm {290 HP/1700 rpm}
• In mode P, E, ATT-P, or ATT-E, the engine speed is kept
around the matching point set in each mode.
• When the load is light, the engine operates in high speed
range. As the load increases, the engine speed is de-
creased and the torque is increased to the matching point
where the torque is balanced with the pump absorption up-
per limit torque (PT). (Graph (1))
• If the load increases further, the engine speed decreases
further as well. (Graph (2))
• The controller decreases pump absorption upper limit tor-
que (PT) to reduce the load applied to the engine. (Graph
(3))
• As the load on the engine decreases, the engine speed in-
creases. (Graph (4))
• The controller increases pump absorption upper limit tor-
que (PT) to keep the engine speed at around the matching
point. (Graph (5))
Control method in mode B and L
Working mode
Partial output
B
81 %
L
62 %
Working mode
Matching point
B
195 kW/1660 rpm {261 HP/1660 rpm}
L
150 kW/1550 rpm {202 HP/1550 rpm}
ENGINE AND PUMP COMBINED CONTROL SYSTEM
10 STRUCTURE AND FUNCTION
10-98
PC500LC-10R
Summary of Contents for PC500LC-10R
