4.
Clean the dust sticking inside the air cleaner body (7) and
on the cover (3) by using a clean cloth or brush.
5.
If any dust is attached to the vacuator valve (4) installed to
the cover (3), remove it.
NOTICE
• Do not clean and reuse the inner element. Replace the inner element with a new one at the same
time when the outer element is replaced.
• If the outer element and cover are installed while the inner element is not installed properly, the out-
er element may be damaged.
• The sealing portion of the improper part lacks precision, and allows the entry of dust, which leads
to damage of the engine. Do not use such improper part.
6.
Remove the inner element (6), then install the new inner element immediately.
Install the inner element securely so that it does not move.
7.
Push in the new outer element (5) straight with your hand into the air cleaner body.
Hold the element, and rock it lightly up and down and to the right and left while pushing it in, the element
can be inserted easily.
8.
Replace the O-ring (8) of cover (3) with a new one.
NOTICE
When inserting the element into the body, if the rubber at
the tip is swollen or the outer element is not pushed in
straight, and cover (3) is installed by force with hook (2),
there is a danger that the hook and air cleaner body may
be damaged, so be careful when installing.
9.
Install the cover (3) according to the following procedure.
1) Align the cover (3) with the element.
2) Lock the tip of hook (2) on the protrusion of the air
cleaner body.
MAINTENANCE PROCEDURE
MAINTENANCE
4-20
Summary of Contents for PC700LC-11
