Take extreme care when inserting it so that the protrusion
(9) in the case fits to the rubber lip (10) of the element.
5.
Align the position of
◇
mark (8) on the case with that of
◇
mark (11) of the filter body label, then install the case to
the filter body.
The element can be installed only when its claw (12) and
claw (13) of the case are correctly inserted in the groove
(14) of the body. Bases (15) and (16) are oval. When in-
serting, take extreme care so that those bases are match-
ed with each other.
6.
Fit the ring (3) to the threaded part of the body and tighten
it with hands firmly until it stops.
7.
Tighten the ring 1/15 to 2/15 turns further (1 to 2 ridges of
the ring) by using the special wrench.
If the engine is operated with the ring tightened insufficient-
ly, oil and blowby gas may leak.
Check the KCCV hose for leakage, crack, and loose clamp, and replace it if necessary.
MAINTENANCE PROCEDURE
MAINTENANCE
4-70
Summary of Contents for PC700LC-11
