Adjustment of rear view monitor guide line
position
6
×
Assembly procedure
5
×
NO.0080
②
While "Horizontal Adjustment" is selected, operate the Luminance control switch to
adjust the X coordinate of Point 2.
①
Select [Point 2] with the UP (
▲
) and DOWN (
▼
) switches and push the ENTER switch,
and the screen moves to the "Point 2" adjustment screen.
Q'ty
Name
Q'ty
Others
Tools to be used
Name
Facilities to be used
4
×
Precautions
3
×
②
While "Horizontal Adjustment" is selected, operate the Luminance control switch to
adjust the X coordinate of Point 2.
①
Select [Point 2] with the UP (
▲
) and DOWN (
▼
) switches and push the ENTER switch,
and the screen moves to the "Point 2" adjustment screen.
③
After adjusting the X-coordinate, push the ENTER switch to select "Vertical Adjustment".
Others
1 ×
2 ×
②
While "Horizontal Adjustment" is selected, operate the Luminance control switch to
adjust the X coordinate of Point 2.
①
Select [Point 2] with the UP (
▲
) and DOWN (
▼
) switches and push the ENTER switch,
and the screen moves to the "Point 2" adjustment screen.
③
After adjusting the X-coordinate, push the ENTER switch to select "Vertical Adjustment".
35
Summary of Contents for WA470-7
Page 1: ...WHEEL LOADER Field Assembly Instruction GEN00122 00 WA470 7 SERIAL NUMBERS 10001 and up...
Page 3: ......
Page 42: ......
