When the degree of emergency is high
• KDPF soot accumulation caution lamp (2) lights up in red
and the action level “L03” lights up in red (4).
• If the machine is stopped completely, the screen changes
to the “Aftertreatment Devices Regeneration” screen (E)
after 3 seconds.
Then, the “Aftertreatment Devices Regeneration” screen
(E) and standard screen (D) are automatically displayed
alternately in accordance with machine stop, until the man-
ual stationary regeneration is performed.
• If KDPF soot accumulation caution lamp (2) lights up in
red, immediately stop the machine in a safe place and per-
form the manual stationary regeneration.
PROCEDURE FOR MANUAL STATIONARY REGENERATION
k
k
CAUTION
Exhaust gas temperature may increase higher than the
previous models during the aftertreatment devices regen-
eration. Avoid getting near the exhaust pipe outlet and
around the aftertreatment devices to prevent being burnt.
Also, keep combustible materials away from the exhaust
pipe outlet and around the aftertreatment devices to pre-
vent a fire.
The manual stationary regeneration can be performed while
KDPF soot accumulation pilot lamp (1) is lit.
1.
Move the machine to a safe place and stop it with engine
running.
2.
Check that there is no person or combustible matter
around the machine (particularly in the direction of the ex-
haust gas flow).
3.
Release your foot from the accelerator pedal and set the
directional lever to NEUTRAL position (N).
OPERATION
EXPLANATION OF COMPONENTS
3-133
Summary of Contents for WA480-8
