OPERATION
EXPLANATION OF COMPONENTS
3-43
CAP WITH LOCK
3
If the machine is equipped with a cap with lock for the fuel tank filler and hydraulic tank filler, open and close the
cap as follows. Use the starting switch key to open and close the cap.
METHOD OF OPENING AND CLOSING CAP WITH LOCK
3
TO OPEN THE CAP
1.
Insert the key in the starting switch securely until the shoul-
der (1) contacts the keyhole.
If the key is not inserted fully into the starting switch and is
turned, the key may break.
2.
Turn the starting switch key counterclockwise and bring the
rotor groove in line with the aligning mark on the cap. Turn
the cap slowly until a “clicking“ sound is made. This
releases the lock and allows the cap to be opened.
TO LOCK THE CAP
1.
Screw the cap into place.
2.
Insert the key in the starting switch securely until the shoulder contacts the keyhole.
If the key is not inserted fully into the starting switch and is turned, the key may break.
3.
Turn the starting switch key counterclockwise and take the key out.
Aligning mark
Summary of Contents for WA800-3E0
