KOMFI-RIDER Cruise User Manual Download

Page: 23 / 28

13.0

DAILY CHECKING

Check the following items before driving. If you find anything abnormal, contact your scooter dealer for
a further inspection before using it.

Item

Inspection Content

Handle bar

Is it tight?
Can they be turned left or right smoothly?

Speed Dial

Can it be adjusted freely and function well?

Throttle Lever

Does the scooter move when the lever is engaged?
Does the scooter stop when the lever is released completely?

Motor

Is there any abnormal noise from the motor?
Does the electromagnetic brake work properly?

Battery Gauge

Does the gauge move to

green when switched “ON”

Is the remaining power enough for your trip?

Horn Button

Does the horn work?

Seat

Is the seat on properly?

13.1

REGULAR CHECKING RECORD

To make sure your scooter is in good condition, go to your scooter dealer regularly.

13.2

CIRCUIT BREAKER

There is one button for the circuit breaker (located on the battery pack)

, if the power switch is “ON”

and the battery gauge does not move, it is possible an electric current has overloaded the scooter.
Reset the circuit breaker by pressing the button.

13.3

TYRES

The condition of the tyres depends on how you drive and use your scooter.

Inspecting Tyre Treads

Please check the tread depth regularly. Replace the tyres when the tread depth is less than 0.5 mm.

14.0

MAINTENANCE

Do not use water, oil or other chemical solutions to clean your scooter. Be sure NOT to spray

the scooter with the water as this can damage the electronic components. Please clean the
scooter by wiping it with either a dry or moist cloth.

Please take the scooter to authorized dealers for repairs and adjustments. Improper

adjustments could lead to accidents and scooter malfunction.

Summary of Contents for Cruise





























Search results

Summary of Contents for Cruise

Reviews:

Related manuals for Cruise

Brands by name

Popular brands

KOMFI-RIDER Cruise, User Manual

Search results

Summary of Contents for Cruise

Reviews:

Related manuals for Cruise

Brands by name

Popular brands