SIA KOMFOVENT reserves the right to make changes without prior notice
Fire damper UVS120 H (Two-Bladed design) ∙
I
nstallation manual ∙ 21-01
6
3. SAFETY REQUIREMENTS
The local regulations for health and safety at work and general safety regulations to be applied.
Personal protective equipment must be worn for such types of work: fire damper electrical installation, fire damper
mechanical connection to the air duct system (ductwork) and any type of service or maintenance works.
Protective gloves must
be worn
Protective gloves protect
hands against abrasion,
oily environment, sharp
metal parts and contact
with hot surfaces.
Protective industrial
helmet must be worn
Industrial helmets protect
the head against impact
from objects falling from
above, by resisting and
deflecting blows to the
head.
Protective boots must
be worn
Protective boots protect
the foot from falling
objects or compression
and prevent slipping on a
slippery floor.
Incorrect use might
cause dangerous
situations
.
It is important to correctly use the fire damper in prescribed way only:
• Fire damper is permitted to use in exhaust or supply air systems.
• Not allowed to operate the fire damper if it do not comply with manufacturer’s installation requirements specified in
this instruction.
• Any changes or modifications of the fire damper are strictly prohibited, except for using manufacturer’s provided
replacement parts.
• Qualified staff only are allowed to replace parts or service the fire damper.
