1024.
5. Screen layout: Select layout two. MAIN screen and PIP-1 screen select
the corresponding signal source DP-1 / DP-2.
Note: The operation of selecting a signal source for a layer is to first click
the corresponding layer button, and then click the signal source button to be
switched.
6. Single screen point-to-point display debugging is completed. Select the
"MENU" menu key to return to the main menu, select the "Shift" + "" key to
enter the save preset interface, and confirm the save to mode one.
7. Select the "MENU" menu key to return to the main menu and select
screen layout layout 4. Enter the corresponding layer setting interface to
adjust the image size and position corresponding to each layer. Select Shift +
button to save to mode two.
8. Equipment arrangement is complete
5.32*2
For instance
The P3 display has a large screen resolution of 1280 wide
and 4096 high. It is required that the large screen can display one screen or
four screens. Each screen is connected one different signal source. Customers
require point-to-point display for display effect
1280
1280
2048
2560
1024
1024
Prepare
4K dual graphics cards with a custom resolution of 1280 2048 graphics
cards do vertical splicing. Desktop computer with DVI output port, laptop
computer with HDMI output port, laptop computer with VGA output port,
high-definition camera with SDI output port. Input all communication input
signals to the corresponding input ports of the splicer.
Quick srt
1. Device mode: Select PGM.
2. Stitching mode: Select 2*2 stitching.
3. Output resolution of each port: select 1280 1024.
4. Screen parameters: 4 output ports are horizontal size 1280 vertical size
1024.
5. Screen layout: Select layout two. MAIN screen and PIP-1 screen select
