•
Tent body (x1)
•
Pole hub (x1)
•
Side panel (x1)
•
Outer fly (x1)
•
Carry bag (x1)
•
22.6 cm pegs (x10)
•
2.4 m guy ropes (x2)
Step 1:
Ensure you are in an area with sufficient
space to set up the tent.
Remove the tent body from the carry bag
and spread it out on the ground.
Step 2:
Ensure the pole hub is securely attached to
the built-in poles. On one side of the tent,
pull out the pole hub with one hand holding
the hub strap, whilst the other presses into
the tent.
The tent’s poles connected to the pole hub
will extend out. Keep placing pressure into
the tent until the poles are fully extended.
Repeat this process on the opposite side of
the tent.
COMPONENTS LIST
ASSEMBLY
Note:
Do not pitch the tent in low-lying areas
prone to flooding.
