Cleaning/Maintenance:
Keg Couplers/Connectors:
14
•
Do not use any solvent-based cleansers or abrasive
pads on the kegerator. Wiping the outside using warm
water and a mild liquid detergent with a soft cloth will
do the job.
•
Beer lines need to be cleaned periodically because of a
crystallized build up which forms on the fittings, lines,
and taps commonly referred to as “beer stone”. If the
beer stone is not completely removed in a cleaning
process it will leave an unsanitary surface that can
harbor microorganisms, which will cause an undesirable
flavor.
•
Your beer line should be cleaned approximately once
every 2–3 months. The dispenser faucet should be
cleaned on a weekly basis or prior to every use if not
used on a regular basis.
NOTE - If you have trouble
manipulating the faucet lever, it usually indicates the
faucet may require cleaning.
DO NOT apply force to
move the handle in this situation, as this will likely lead
to damaging the handle and/or faucet.
•
We recommend purchasing a Beer Line Cleaning Kit
to make the job of cleaning your line and taps easier!
•
About every 6 months it is good practice to clean the
front grill of the unit (turn the power off first). This will
help maximize the life of the compressor.
•
When the kegerator is not in use it is best to remove
any beer in your line. First, turn off the CO
2
and
dispense beer until no more beer is flowing. This will
release pressure in the keg so that the coupler can
safely be detached.
By now you most likely know which types of kegs you’ll be serving through your kegerator - commercial, homebrew,
or maybe both (!?). Below is the list of the coupler options. When purchasing a commercial keg it is best to confirm
the Coupler Type with the liquor store/distributor.
Commercial Couplers By Type/System (subject to change):
Homebrew Disconnects For Corny/Soda Kegs:
D TYPE
Most US breweries
BALL LOCK FITTINGS: aka Pepsi-style (most common among homebrewers)
GRAY = Gas Fittings BLACK = Liquid Fittings
PIN LOCK FITTINGS: aka Coke-style
2 PRONG GRAY = Gas Fittings 3 PRONG BLACK = Liquid Fittings
S TYPE
Newcastle, Becks, Heineken
U TYPE
Guinness, Harp
A TYPE
Paulaner, Spaten
G TYPE
Anchor, Boddington
