manualshive.com logo in svg

Komos ND-1600, Instruction Manual

The Komos ND-1600 Instruction Manual is the essential guide for operating this innovative product. Packed with detailed step-by-step instructions, this manual is available for free download at 88.208.23.73:8080, providing users with easy access to the information they need to get the most out of their Komos ND-1600.

Share
Download
background image

ASSEMBLY INSTRUCTIONS

Assemble the kegerator prior to installing/plugging in the unit.

1.

 CO

2

 tubing

2.

  Beer line tubing

3.

  Intertap Faucet(s) with black tap handle

4.

  Tower collar (hides tower screws)

5.

  Tower gasket

6.

  Tower shank with Duotight tailpiece

7.

  Multi-purpose wrench

8.

 CO

2

 tank strap

9.

  Stainless drip tray

10.

 Guard rail with 4 screws

11.

 Door handle with 2 screws

12.

 Allen wrench for guard rail & handle

13.

 Feet knobs (4)

14.

 Casters (4)

15.

 Long casters screws (8)

16.

 Short casters screws (8)

17.

 Tower to kegerator screws (4)

18.

 Lock key (2)

19.

 Duotight tees (Included with 2 & 3 faucet towers only)

20.

 Stepless clamps (Included in case Duotight connections are not used)

Take stock of what comes with the kegerator.  
Remove all the items from inside the unit and unpack the tower box and 
tubing bag.  You should have:

•Multi-purpose wrench (included)
•Allen wrench (included)
•#1 Phillips head screwdriver
• Tubing cutter or scissors

To assist in assembly we suggest having the following tools on hand:

I f Using Stepless Clamps Instead of Duotight:

•Needle-nose pliers
•  Pinch clamp pliers (preferred)
• If you don’t have pinch clamp pliers, regular wire 

cutters will work

4

Summary of Contents for ND-1600
















Reviews:

No comments

Related manuals for ND-1600

Brands by name

Popular brands

Load more brands