Whether you have a single, double, or triple faucet tower the process is the same.
TIP:
For those setting up a triple faucet tower - start with the lowest faucet.
1.
Set the tower's bottom collar sleeve onto tower.
2.
Feed the beverage line tubing up through the
bottom of the tower so tubing comes out both
the top and the bottom of the tower.
3.
Attach the Duotight fitting to the beverage
line coming from the top end of the tower.
Feed the Duotight fitting and tubing through
the tap hole. To attach the Duotight fitting,
push the fitting onto the tubing then pull back
slightly to lock in place.
NOTE: repeat this step
for each additional faucet your tower has.
4.
Locate the tower shank and remove the nut and
white convex collar and set them aside. From
the outside of the tower, attach the Duotight
fitting to the tower shank. Slide the shank and
tubing into the faucet hole.
5.
Turn the tower upside down. Slip the white
convex collar and shank nut onto the beverage
line with the white convex collar first and the
shank nut second.
6.
Using your finger to hold the tower shank in
place, align shank with convex collar first and
then the shank nut and tighten by hand.
7.
Next tighten the shank nut with the included
multipurpose wrench.
8.
Attach the faucet to the shank; tighten with
the included multipurpose wrench. Attach the
tap handle and tower cap.
Assemble The Tower:
7
1.
3.
5.
7.
2.
4.
6.
8.
