Kompernass KH 3159 PALM DETAIL SANDER, Operation And Safety Notes

j   

Sand difficult to reach places with the front or 
side corners of the backing plate 

O

.

L 

Maintenance and cleaning

Attention:

 before starting any work on your sander, 

always pull the plug out of the mains socket.

j   

Remove any dirt from the tool, surfaces and 
other items in the working area immediately 
after you finish work. 

j   

Clean the safety filter 

Y

 of the dust extraction 

box 

T

 by pulling the safety filter out of the dust 

extraction box 

T

. Suck out the debris carefully with 

a vacuum cleaner using a low suction pressure.

j   

Clean the tool and remove any adhering dust 
with a narrow paint brush. 

j   

Never any kind of sharp object or petrol, solvents 
or cleaning agents that might attack plastic. Do 
not allow any liquids to enter the inside of the 
tool.

j 

Always keep the ventilation slots 

I

 clear. 

L 

Disposal 

   The packaging consists entirely of envi-

ronmentally-friendly materials. It can be 
disposed of at your local recycling facility.

Do not dispose of electric tools in 

  the household waste!

In accordance with European Directive 2002 / 96 / EC 
about waste electrical and electronic equipment and 
its transposition into national legislation, worn out 
electric tools must be collected separately and taken 
for environmentally compatible recycling.

 Contact your local refuse disposal authority for more 
details of how to dispose of your eletric tools.

L 

Information

L 

Service

Details of the Service Centre responsible for your 
region are shown in the warranty documents.

L 

Declaration of conformity / 

  Producer  

We, Kompernaß GmbH, Burgstr. 21, D-44867 
Bochum, Germany, hereby declare that this product 
complies with the following EU directives:

Machinery Directive (98 / 37 / EC)

Low voltage directive (73 / 23 / EEC)

Electromagnetic compatibility (89 / 336 / EEC)

Applicable harmonized standards
EN60745-1:2003+A1, EN60745-2-4:2003,
EN55014-1:2000+A1+A2, EN55014-2:1997+A1,
EN61000-3-2:2000+A2, EN61000-3-3:1995+A1,
EN50366:2003

and confirm this with the CE symbol.

Type / Machine designation: 

Palm detail sander XQ

2

Bochum, 01.07.2006

Hans Kompernaß
- Managing Director -

We reserve the right to make technical modifications in the course 
of further development.

9 

UK / IE

Operation / Maintenance and cleaning / Disposal / Information