8
Danger!
Should you do so, you may receive an electrical shock!
2. Insert the cigar lighter plug
u
firmly into the cigar lighter holder in
the vehicle.
3. Check to see if an adaptor is required for use on the object to be
inflated. Should this be the case: Press resp. screw the required
adaptor into the opening of the connection valve
r
.
4. Check to ensure that the fastening lever of the connection valve
r
is open. When open, the fastening lever is in a vertical position.
5. Press the opened connection valve
r
onto the valve of the object
to be inflated. Press it down so that it is firmly seated. Should you be
using one of the adaptors
i
: Press the connection valve with the
adaptor into the valve of the object to be inflated.
6. Close the connection valve
r
, in that the fastening lever is pressed
down. Continue to firmly hold the connection valve down. Ensure
that the connection valve cannot disconnect itself from the valve of
the object being inflated.
IB_KH4106_UL33284_LB4B 22.04.2009 17:21 Uhr Seite 8
