GB
│
MT
│
35
■
KM 250 C1
Before first use
■
Remove all packaging materials from the
appliance .
■
Clean the appliance as described in the section
“Cleaning and care” .
■
Ensure that all parts are completely dry before
operating the appliance .
Assembling the appliance
NOTE
►
The appliance will not start until the bowl
5
and the lid
3
are correctly attached .
1) Place the motor unit
7
on a flat surface so that
the sucker feet can attach firmly and the
appliance stands firmly in place .
2) Place the bowl
5
onto the motor unit
7
so
that the arrow on the bowl
5
points
towards the open lock symbol
on the
motor unit
7
. Then turn the bowl
5
until the
arrow points to the closed lock symbol
and the bowl
5
clicks into place .
If you want to work with the cutting blades
4
,
assemble the appliance as described in the section
“Cutting blades” .
If you want to work with the food processing
attachments, assemble the appliance as described
in the section “Food processing attachments” .
Cutting blades
1) Place the cutting blades
4
onto the drive
shaft
6
. The flattened side of the drive shaft
6
must correctly fit into the take up of the cutting
blades
4
. Otherwise the cutting blades
4
cannot be properly attached .
2) Place the lid
3
onto the bowl
5
so that the
arrow ▼ on the lid
3
coincides with the
arrow
and the opened lock symbol
on
the bowl
5
.
3) Turn the lid
3
until the arrow ▼ on the lid
3
points to the arrow and the closed lock
symbol on the bowl
5
.
4) Place the pusher
1
into the feed tube
2
.
5) Insert the plug into a mains power socket .
WARNING! RISK OF INJURY!
►
Do not change accessories unless the drive is stationary and the
mixer is unplugged from the power supply! The appliance will run on
for a short time after being switched off!
►
Never leave the appliance unattended!
►
Before changing accessories or additional parts that are in motion
during operation, the appliance must be switched off and disconnected
from mains power .
Summary of Contents for KM 250 C1
Page 3: ......
