PAMFW 12 C3
■
50
│
GB
│
MT
Application:
–
removal of material residues, such as tile adhe-
sive, when replacing damaged tiles
–
milling of grout on wall and floor tiles.
Scraper
Materials:
Mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application:
–
removal of material residues, such as carpet
glue residue on the floor.
Sanding plate
Materials:
Wood and metal (sanding sheets supplied),
wood*, metal*
*depending on the sanding sheet
Application:
–
sanding up to edges and hard to reach areas.
Fitting the sanding sheet onto the
sanding plate
♦
Place the sanding sheet centrally on the
sanding plate .
Changing tools
NOTE
►
If you wish to use the dust collection, it must be
connected before fitting the tool (see section
“Connecting a dust extraction device”).
WARNING! RISK OF INJURY!
■
Always remove the battery before working on
the power tool.
♦
If necessary, remove an already fitted tool.
To do this, raise the tool release lever .
♦
Fit the tool (e.g. the plunge saw blade ) onto
the tool fitting.
NOTE
►
You can fit the tools in any snap position on
the tool fitting.
♦
Fix the tool in place by pushing the tool release
lever back down again.
■
Check that the tool is fitted firmly.
Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury.
Summary of Contents for PARKSIDE PAMFW 12 C3
Page 3: ...Z52 A1 Z64 B2 HCS C...
Page 32: ...PAMFW 12 C3 28 IT MT...