KT-70E / KT-90E / KT-70SE User Manual
Page 13 of 59
24 April 2018
2.
Product Description
2.1.
Intended Use
The compressor is exclusively for compressing air at an operating pressure of 4500 psi
with a maximum pressure of plus 10%. The compressor block is designed for intermittent
operation. The maximum duration must not exceed 45 minutes. After a rest time of 15
minutes is necessary. This represents a total investment of 4 Nm. Any other use or ex-
tended use is considered improper. The manufacturer is not liable for any resulting dam-
age. The risk is borne solely by the user.
It is expressly prohibited to draw gases other than air. Operation in a Nitrox environment
up to 36% oxygen concentration is permitted.
Intended use also includes observing the operating instructions and compliance with the
inspection and maintenance conditions.
The 2.5 CFM KT-70E and KT-70SE are tailored to the specific requirements of filling
air tanks of up to 20L. The 3.2 CFM KT-90E is suited for filling air tanks of up to 45L.
Their construction has been designed for this purpose.
The KT-70E and KT-90E are targeted at SCUBA and other markets using DIN 200 or
DIN 300 couplers. The KT-70SE “Shooter’s Edition” is intended for Air Gunners and
Paintball enthusiasts using a foster style Quick Disconnect on their air cylinders.
Figure 1. KT-90E
Figure 2. KT-70SE
i
Summary of Contents for KT-70E
Page 49: ...KT 70E KT 90E KT 70SE User Manual Page 49 of 59 24 April 2018 Figure F First Stage Cylinder...
Page 51: ...KT 70E KT 90E KT 70SE User Manual Page 51 of 59 24 April 2018 Figure 8 Third Stage Cylinder...
Page 53: ...KT 70E KT 90E KT 70SE User Manual Page 53 of 59 24 April 2018 Figure 10 Filter Housing...
Page 54: ...KT 70E KT 90E KT 70SE User Manual Page 54 of 59 24 April 2018 Figure K Casing...
