KT-70E / KT-90E / KT-70SE User Manual
Page 15 of 59
24 April 2018
•
Configuration 2 (C2 Option): C2 builds on the C1 configuration, and adds the Auto-
matic Shut-Off and Hour Counter.
The KT-70SE is configured with a fill valve with bleed, and a fill hose with a Quick Discon-
nect coupling. The Automatic Shut-Off and Hour Counter are optional on the KT-70SE
2.3.1.
Automatic shut-off.
If configured with the automatic shut-off, the compressor will fill the target cylinder to
the maximum rated pressure of the compressor, then turn off the motor.
2.3.2.
Hour counter.
If configured with the Hour counter, the operating hours will be displayed on the hour
counter, mounted on top of the electrical motor.
2.3.3.
Minimum Pressure Valve.
If configured with the Minimum Pressure Valve, air will not flow out of the filter until
the minimum pressure is achieved (150 bar, or 2200 psi, minimum), and when a large
cylinder is being filled, the pressure within the filter will be maintained at the minimum
pressure or above. (Not available with KT-70SE)
2.3.4.
Automatic Condensate Drain.
If configured, the Automatic Condensate Drain (ACD) will bleed off the condensate
into a separate container on a defined interval.
Summary of Contents for KT-70E
Page 49: ...KT 70E KT 90E KT 70SE User Manual Page 49 of 59 24 April 2018 Figure F First Stage Cylinder...
Page 51: ...KT 70E KT 90E KT 70SE User Manual Page 51 of 59 24 April 2018 Figure 8 Third Stage Cylinder...
Page 53: ...KT 70E KT 90E KT 70SE User Manual Page 53 of 59 24 April 2018 Figure 10 Filter Housing...
Page 54: ...KT 70E KT 90E KT 70SE User Manual Page 54 of 59 24 April 2018 Figure K Casing...
