KT-70E / KT-90E / KT-70SE User Manual
Page 40 of 59
24 April 2018
10.2.
Maintenance Plan
For the first time after 25 operating
hours
Chapter
Date
Signature
Check function and tightness of the filling
hose valve
- -
Check O-ring seal
- -
Check V-belt tension
- -
Oil change
10.4.3
Check tightness of all cooler and connect-
ing lines
- -
Check fastening of the cooler
- -
Final pressure gauge must be located in the
unpressurized state to the 0 position
10.4.4
Tighten valve cap screws and valve pin
screws.
Daily
Chapter Date
Signature
Check oil level
10.4.1
After 10 Hours (See 8.3)
Chapter Date
Signature
Change filter
10.4.2
Check O-rings on the filter
- -
Every 500 Operating Hours
Chapter Date
Signature
Oil change
10.4.3
Change O-rings on the filter
- -
Change O-rings on the cylinder cover
- -
Clean the filter unit
- -
Check safety valve
10.4.5
check exhaust
- -
Summary of Contents for KT-70E
Page 49: ...KT 70E KT 90E KT 70SE User Manual Page 49 of 59 24 April 2018 Figure F First Stage Cylinder...
Page 51: ...KT 70E KT 90E KT 70SE User Manual Page 51 of 59 24 April 2018 Figure 8 Third Stage Cylinder...
Page 53: ...KT 70E KT 90E KT 70SE User Manual Page 53 of 59 24 April 2018 Figure 10 Filter Housing...
Page 54: ...KT 70E KT 90E KT 70SE User Manual Page 54 of 59 24 April 2018 Figure K Casing...
