Parameter Description
Cable Modem users. With this system, ADSL ISP automatically assigns all
the required IP parameters to any device connected to it when the device
log on.
PPP ID/Password
With PPPoE selected in IP Type drop down list, please enter the user name
and password here.
IP Addres/Subnet
Mask/Router IP
With Static IP selected in IP Type drop down list, please enter IP address,
subnet mask and router IP of the terminal here. Note that this address
should match the IP address assigned to you by network administrator or
your ISP.
DNS/DNS2
This field defines the primary DNS (Domain Name Server) or backup DNS
address. With Static IP selected in IP Type drop down list, plese enter
DNS IP of the terminal here.
MAC
MAC address is the physical address supplied by the Ethernet NIC.
4.2 SIP Protocol Configuration Parameters
! Note: Please check with your ISP for the protocol settings. Changing the settings without proper
guidance may result in the the terminal not functioning.
Parameter Description
SIP Server Address
SIP server address, Please ask your service provider if you do not know
what to fill in.
Provider Index
Display according to service provider type. Please ask your service
provider if you do not know which to select.
SIP Port
SIP server port, 5060 is default value. Please ask your service provider if
you do not know what to fill in.
Register Port
The local SIP port used by terminal to send register packets. The default
port number is 5060 or 5063. Please ask your service provider if you do
not know what to fill in.
Domain Name
It’s the SIP realm. Please ask your service provider if you do not know
what to fill in.
Expire Time
It used for negotiate with the softswtich for registration expire time.
NAT Traversal
nat traversal: When the IP phone with private IP address need
communicate with other IP phones in a different LAN or on Internet,
