Connect to the mobile client
——Hotspot Mode
1. Connect your phone to WiFi, scan the QR code
below, or search for “ProscenicHome” in the app store
to download the app.
2. In the power-on state, long press the key “ ” 66
seconds until the WiFi indicator “ ” Slow flash.
Connect To Mobile Client & Parameters
3. Add a humidifier device to the app, switch to the hotspot mode, and
confirm that the WiFi indicator is in a slow flashing state.
4. According to the prompt of the
APP interface, select WiFi and enter
the password.
807C
LDS-xxxx
M7
H500
H600
Please select the purchased device
Click or pull up to load more
Please select the p
807C
......
......
indicator flashes slowly
Add a Device AP mode
make sure the WiFi indicator flashes slowly
Add a Device
AP mode
make sure the WiFi indicator flashes slowly
5. According to the APP interface prompt, turn on“Phone Settings - Wireless LAN(WiFi)”, select “Proscenic-xxxx”
network connection and return to APP. Perform network configuration and wait for the distribution network to
complete.
* Note: the host does not support 5.8g band WiFi network.
Setting
AVAILABLE NETWORKS
WLAN
WLAN
807C
XXXXXXXX
XXXXXXXX
Setting
AVAILABLE NETWORKS
WLAN
WLAN
807C
XXXXXXXX
XXXXXXXX
Network Configuration
SmartLife-XXXX
807C
Device Choice
Cancel
Refresh
SmartLife-XXXX
807C
Device Choice
Cancel
Refresh
Summary of Contents for SPS-913BW
Page 1: ...Ultrasonic Mist Humidi er User Manual...
Page 15: ......
