Konfor SPS-913BW, User Manual

Trouble Shooting Guide

10

If any trouble is found in normal operation, please kindly refer to the following points:

Trouble Shooting Guide

Do not dispose this product as unsorted municipal waste, collection of such waste separately for 

special treatment is necessary.

DISPOSAL

Trouble

Possible reasons

Solution

Power lamp off, does not work

No power supply

Connect power supply, switch on

Power lamp on, no mist outlet 

with wind

Abnormal smell mist

1. New unit

2. Dirty water or water sitting too long

1. Take out water tank, open cover, 

let it stay 12 hours in cool position

2. Clean water tank, fill with clear water

1. No water in water tank

2. Security switch is too loose

1. Fill water into water tank

2. Tighten the switch

Power lamp on, unit doesn’t work

Too much water in the water basin

Pull out same water from the water 

basin, close the cover of water tank 

tightly

Mist fog is too low

1. Too much scale in the water basin

2. Water is too dirty or water kept too 

long in the tank

1. Clean transducer

2. Clean water tank, change to fresh 

clear water

Abnormal noise

1. Resonant in water tank when 

water is too low

2. Unit is on a unstable surface

1. Fill water into water tank

2. Move the unit to a stable flat surface

Mist fog coming out from around 

nozzle

There are apertures between the 

nozzle and water tank

Dip the nozzle in water for a while 

and then fix it to the socket on 

water tank