8
9
MaKinG THree-WaY calls
The simplest way to set up a multi-party call is to use the conference guide (see page
10). You can connect another party to an on-going call as follows. During a call, the
button acts as Flash/R-pulse, which means it transmits commands to the PBX.
If you experience problems making multi-party calls: Different PBXs may require
different signals. Please contact your telephone administrator or service provider.
Turn to page 12 for more details.
Press
(
f
).
A second dialling tone is heard.
Dial the second participant’s number and wait for an answer.
Press the
(
f
) button and then
3
.
All three participants are now linked together in one call.
if you don’t get an answer when you dial the second number
Go back to the first call by pressing
(
f
).
ansWerinG anD MaKinG calls
aDJUsTinG THe sPeaKer VolUMe
Adjust the speaker volume using the buttons
and
.
PlacinG calls on TeMPorarY HolD
Mute
Press (
Mute
) to turn off the microphone.
The LEDs change from blue to red. The other party cannot hear what you are saying.
Press (
Mute
) to reconnect the call.
Hold
Press
HolD
to put the call on hold.
The LEDs change from blue to flashing red. Both the microphone and the speaker are turned off
and the call is on hold.
Press
HolD
to reconnect the call.
enDinG calls
End the call by pressing
.
DUrinG a call
