Note
Units containing lithium or alkaline batteries must be handled separately and with care.
Such units are marked accordingly. Do not attempt to recharge such batteries, open them
or dispose of them by incineration. Refer to the applicable product data sheets.
Storage after use
If a unit is removed from its operating location and placed into storage, it must be
properly cleaned and prepared before packing.
Cleaning cabinets
If a cabinet has been exposed to salt atmosphere while it was in use, it must be thoroughly
cleaned both internally and externally to prevent corrosion.
1
Wipe the cabinet externally using a damp cloth and a little detergent. Do not use
excessive amounts of water as the unit may not be water tight. On completion,
dry the unit thoroughly.
2
All surfaces must be inspected for signs of corrosion, flaking/bubbling paint, stains
etc. Damaged or suspect areas must be cleaned, prepared and preserved using the
correct preservation mediums for the unit. The mediums to be used will usually be
defined in the units’ maintenance manual.
3
Open the unit, and using a vacuum cleaner, remove all dust etc. from the unit.
Great care must be taken to ensure the circuit boards and modules are not damaged
in the process.
Mechanical units
If a mechanical unit have been exposed to a salt atmosphere or corrosive environment
while it was in use, it must be thoroughly cleaned both internally and externally to
prevent corrosion.
1
If the construction materials and type of unit permits, wash the unit using a
high-pressure hose and copious amounts of fresh water. Examples are the lower
parts of hull units (outside the hull) or subsea units
2
Ensure that all traces of mud and marine growth are removed. Use a wooden or
plastic scraper to remove persistent growth, barnacles etc. On completion, dry
the unit thoroughly.
Caution
Do not use a high pressure hose in the vicinity of cables or transducers.
Do not use sharp or metal tools on a transducer face.
397128/C
105
Summary of Contents for ACS500
