Kongsberg ACS500
Valves used in the sequence
Ordinary defined single valve operations may be put together to a predefined sequence of
valve operation in order to perform a controlled shutdown of a system.
This specific sequence must be defined by the customer and predefined in the ACS500
system parameter set.
Sequence operation and timing
The auto shutdown sensors (minimum 1, maximum 3 sensors) are connected to the two
available SCU’s. It is possible to define different criteria for auto shutdown triggering
from the sensors. Both the SCU’s will receive the same triggering signal simultaneously.
In order to control the valve operation, by sending current to a specific solenoid only
from one SCU at a time. The programmed sequence operation may then be performed
as illustrated below.
The sequence in the example with 4 single valve operations will be executed directly
after triggering from the sensors from SCU 1. The SCU 2 will perform a defined delay
before starting the ASHD valve sequence, trying to avoid that the SCU's are sending
current to one solenoid at the same time.
•
When an ASHD operation is performed, the main priority is subsea at the SCU's in
order to control the valve package.
• If an ACU operator tries to control and communicate with the SCU in ASHD time
slot, a possible status reply from a SCU will only inform the operator that an ASHD
sequence is performing or has occurred.
It will be possible to read a specific ASHD status info telegram when the ASHD
sequence is finished. An ASHD sequence will be executed once, and then it is required
to enable the function from the ACU if it is to be run a second time.
Enabling/Disabling Auto Shutdown
The ASHD system must be configured by certified KM personnel.
See your registration form for your ASHD specification.
52
397128/C
Summary of Contents for ACS500
