922-20207011/1.0
25
Procedure
1
Set up the Sonar Processor in the location available for the operator workstation.
Tip
Covering the laptop computer from direct sunlight with a sunshade will make the
display easier to see.
a
Make sure that adequate ventilation is available to avoid overheating.
b
Make sure that enough space is made available for maintenance purposes.
c
Make sure that the installation method allows for the physical vibration,
movements and forces normally experienced on a vessel.
2
Select the power cord with the appropriate local plug and connect it to the AC to DC
Sonar Processor power supply.
3
Connect the AC to DC power supply to the Sonar Processor.
4
Connect the mouse to a USB port on the Sonar Processor.
Note
When you connect the cables, make sure that they are all properly secured, and able
to withstand the vibration and movements of the vessel.
Result
The Flexview Sonar Processor is set up in a suitable location with the power supply and
mouse connected.
Summary of Contents for Flexview
