922-20207011/1.0
43
3
Grease the connectors with Molykote 44 Medium.
a
Apply a layer of grease corresponding to a minimum 1/10 of socket depth (A) to
the female connector.
If mating underwater, more grease is required — about 1/3 of socket depth (B).
b
Completely cover the inner edge of all sockets.
c
Leave a thin, transparent layer of grease on the face of the connector (A).
If mating underwater, make sure that all sockets are completely sealed (B).
4
Fully mate the male and female connector to secure optimal distribution of grease
on pins and in sockets.
Remove any excess grease from the connector joint.
5
Make sure that the grease has been sufficiently applied.
Note
If mating underwater, you can skip this step.
a
De-mate and check for grease on every male pin.
b
Re-mate the connector.
Summary of Contents for Flexview
