922-20207011/1.0
55
a
Mate the appropriate test connectors to either end of the spliced cable.
Note
SubConn cable connectors must be greased before mating (grease at least 1/10 of
the socket depth on the female connector).
For Seacon connectors, make sure that the o-ring is not missing. Line up the pins
and tighten the locking sleeve.
b
Detach the wiremap adapter from the cable tester.
c
Plug one of the RJ45 connectors (A) on a test connector (B) into the RJ45 socket
on the wiremap adapter.
Note
It doesn’t matter which cable end you connect to the wiremap adapter.
Summary of Contents for Flexview
